The DLRefreshAll command refreshes all dynamic links in the drawing.
Type DLRefreshAll at the command line.
This command is available to force a refresh of all Dynamic Links in the drawing, should any linked items appear out-of-date. It can also be used to trigger an update of all Dynamic Links in the drawing when Dynamic links are disabled using the DLEnabled command, although the DLRefresh or DLRefreshItems commands often work better in that situation, since this command forces an update of all links. In drawings that contain thousands of Dynamic Links, it may take a while to refresh all links.
This option will also force a refresh of any Cogo Point User Defined Properties that are configured to hold coordinates in alternate coordinate systems.
Creates linked PVIs from one Profile to one or two other Profiles; particularly useful for creating linked center, left, and right profiles for Three-Line Profiles.
Allows User Defined Properties on Cogo Points to be automatically populated with coordinates in alternate Coordinate Systems.
Enables or disables the automatic updating of Dynamic Links for a drawing.
Manages dynamic links between Cogo Points and other Civil-3D entities. This allows the elevations of Cogo Points to change dynamically whenever the "master" object changes. Similarly, the description may be set to display the Station/Offset of the point, and the Station/Offset will also dynamically respond to changes in the model. The "master" object may be a Surface, a Profile, an Alignment, or a linear entity such as a Feature Line, Survey Figure, Polyline, or 3D-Polyline.
Manages dynamic links between Profile PVIs and other Civil-3D entities. This allows the elevations of PVIs to change dynamically whenever the "master" object changes. The "master" object may be a Surface, another Profile, or an adjacent PVI on the same Profile.
Refreshes all Dynamic Links in the drawing that are known to be out-of-date.
Refreshes all Dynamic Links attached to selected objects.