SincpacC3D General Information Command Summary Quux Software



The DLSewerLateralsManager command removes the links between laterals and main line pipes.


Type DLSewerLateralsManager at the command line. You will then see a dialog box like that below:

DLSewerLateralsManager Dialog box

Link Manager

The dialog box allows for the removal of links.

See Also

Blue Dot DLSewerLaterals

Creates links between main pipe networks and lateral pipe networks.

Blue Dot DLSewerLateralUpdateRules

Updates the rules that a lateral pipe uses when updated in relation to a main line pipe.

Blue Dot DL3LineProf

Creates linked PVIs from one Profile to one or two other Profiles; particularly useful for creating linked center, left, and right profiles for Three-Line Profiles.

Blue Dot DLCoordConvert

Allows User Defined Properties on Cogo Points to be automatically populated with coordinates in alternate Coordinate Systems.

Blue Dot DLEnabled

Enables or disables the automatic updating of Dynamic Links for a drawing.

Blue Dot DLProfiles

Manages dynamic links between Profile PVIs and other Civil-3D entities. This allows the elevations of PVIs to change dynamically whenever the "master" object changes. The "master" object may be a Surface, another Profile, or an adjacent PVI on the same Profile.

Blue Dot DLRefresh

Refreshes all Dynamic Links in the drawing that are known to be out-of-date.

Blue Dot DLRefreshAll

Refreshes all Dynamic Links in the drawing.

Blue Dot DLRefreshItems

Refreshes all Dynamic Links attached to selected objects.