SincpacC3D General Information Command Summary Quux Software



The ZoomPt command zooms the display to the specified point number.


Type ZoomPt at the command line. You will be prompted to enter either the Number or Name of the Cogo Point to zoom to.

You may also hit ENTER without typing anything to enter a new height factor. The zoom height is determined by taking the current Annotation Scale and multiplying it by this number. Enter a lower number for the zoom height factor to zoom in closer to the point, or a higher number to zoom out further. The default zoom height factor is 4.

ZoomPt output

See Also

Blue Dot FindPt

Find and Replace text in the Raw Description for points.

Blue Dot FreePt

Displays a list of available point numbers in the command window.

Blue Dot MovePoints

Move points in the drawing. Points are only moved horizontally, with no datum adjustment, and may be selected by Point Group.

Blue Dot NextPt

Set the next point number for point creation.

Blue Dot PGAddRemovePoints

Add and/or remove selected Civil-3D Points to/from one or more existing Point Groups.

Blue Dot Pt3d

Manually create points with a variety of options, including getting the elevation from the pick point.

Blue Dot RotateMarkers

Rotate Civil-3D Point Markers.

Blue Dot RotatePoints

Rotate Civil-3D Point locations, with an option to select by point group.

Blue Dot UsedPt

Displays a list of used point numbers in the command window.